The 2026 Panigale, Streetfighter & Multistrada V2 & V2S models have an T50 torx bolt fitted to each side of the swing-arm pivot. Unfortunately, we cannot produce a safe locating fitting kit for these bolts. Torx bolt pictured below:
To get around this issue we supply 2 x 18mm bolts to replace the torx bolts. These are genuine Ducati bolts (Part No: 7791D691AA), they were actually used on the 2025 models. We assume Ducati have changed the bolts for aesthetic reasons as the bolts are identical in everyway apart from the head. Picture of the bolts on the 2025 model below:
When you receive the fitting kit from us you will receive: 2 x of the Genuine Ducati 18mm bolts, 1 x T50 torx socket (to fit a 3/8 drive wrench) to remove the 2026 bolts, Fitting instructions (including torque spec), as well as the fitting kit itself.
Tools required:
- 3/8 Wrench/Ratchet
- Torque Wrench with 18mm Socket adapter
Picture of fitting kit below:
You will only need to change the bolts once so that our fitting kit can be used. If at any point you wish to return the bike to completely stock (perhaps to sell the bike for example) it is a simple case of re-fitting the original bolts.
If you are unsure or have any questions on any of the above please do not hesitate to contact us.