When using the abba Superbike Stand or Sky Lift on the Triumph Bonneville T120 & T100 the sprocket cover on the right hand side of the machine must be removed in order to access the swing-arm pivot. This cover can be removed via 4 x bolts, see pic below:
There is also a small plastic cap on the left hand swing-arm pivot, this can easily be removed with a flat blade screwdriver, cap is circled red in picture below:
Pictured is the T120 Bonneville, the T100 sprocket cover is a slightly different design, however the same parts need to be removed.
Once removed you will then have access to both swing-arm pivot bolts.
The Superbike Stand or Sky Lift can then be fitted as normal.
If you require any further information on this please do not hesitate to contact us.