Please read the three points below to fully understand which fitting kit is required for this model.
1. The 2025 Panigale, Streetfighter & Multistrada V2 & V2S models should have an 18mm nut fitted to the swing-arm pivot on each side, as per the picture below:
2. However, it has come to our attention that some machines (registered as 2025 models) have been sold with the 2026 bolts already fitted. The 2026 bolts are pictured below:
3. If your bike has the 2026 bolts fitted you will need to select the 2026 model year for your bike instead of 2025 on our drop-down list when ordering.
As always, if you are unsure on any of the above please do not hesitate to contact us.