0 items
$0.00
Excluding Delivery
0044 1245 322331 Shut
0 items
$0.00
Excluding Delivery

Yamaha FZ-07 & FJ-07 & XSR 700

When using the abba Superbike Stand or Sky Lift on the Yamaha FZ-07, FJ-07 & XSR700 the frame covers need to be removed to gain access to the swing arm pivot before the Stand/Lift can be fitted. Removing the covers is very simple, just by unscrewing two small screws either side. The picture below shows the cover that needs to be removed from both sides of the bike.

Once the covers are removed the Stand/Lift can be fitted in the normal way.

 

 

Once the two screws are removed pull firmly and the cover will release from the plastic tab. A simple firm push locates the cover back into position.

The picture to the below shows the cover removed. The two white arrows show the small plastic tab on the bike and the location hole on the back of the frame cover.

 

If you require any further information on the this please do not hesitate to contact us.